Pressure Ratings: PN10,16
Design Standard: DIN 3357 Part 1
Face to Face Length: EN 558-1 DIN3202 F4/ DIN3352 F5
Valve Test: DIN3230
Valve Marking: EN 19
Flange Standard: DIN2533
Product Group: Ball Valve
Medium: Water


Sales Department:
+90 312 511 48 32
+90 533 617 47 79
Email: export@ekoval.com

  • Valve Design According to DIN 3357 Part 1  / DIN 3372
  • Face to Face dimensions Regarding to EN 558-1 DIN3202 F4 / DIN3352 F5
  • Flange Connection According to DIN2533, EN1092-2 PN10-16
  • Valve Testing: DIN3230 / ISO 5208 / EN 12266-1
  • Mounting Pad: ISO5211
  • Leak Proof Service
  • The fluid resistance is small, and its resistance coefficient is equal to that of a pipe section of the same length
  • Simple structure and light weight
  • Good Sealing Performance and has been Widely Used in Vacuum Systems
  • When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes.
  • Wide range of applications, with a diameter ranging from a few millimeters to a few meters, and can be applied from high vacuum to high pressure. This type of valve should generally be installed horizontally in the pipeline.
  • Excellent Sealing and Fluid Flow
  • Quarter Turn Operation
  • Body: Cast Iron (GG25 or GG40)
  • Bonnet: Cast Iron (GG25 or GG40)
  • Nut: Carbon Steel
  • Bolts: Carbon Steel
  • Ball: Stainless Steel (SS304)
  • Seat: PTFE
  • Washer: PTFE
  • Gasket: PTFE
  • Stem: Stainless Steel SS304
  • Stem Packing: PTFE
  • Gland Flange: Cast Iron GG25 or GG40
  • Gland Bolt: Carbon Steel
  • Lever: Ductile Iron (GGG40)
  • Circlip: Carbon Steel
  • Inner and outer surface of the valve is powder epoxy (250-350 Microns) coated
  • JIS 10K Verion Available (Refer to EKO 3010) 
  • Can be used with Pneumatic Actuator
  • With Electric Actuator
  • Electric Actuator Ready