Pressure Ratings: 10K
Design Standard: JIS 10K
Face to Face Length: JIS B2002 
Valve Test: JIS B2003
Valve Marking: EN 19
Flange Standard: EN 1092-2
Product Group: Ball Valve
Medium: Water


Sales Department:
+90 312 511 48 32
+90 533 617 47 79
Email: export@ekoval.com

  • Valve Design According to JIS 10K, ANSI B16.1 
  • Face to Face dimensions Regarding to JIS B2002 DN15-100(6), DN125-200(39)
  • Flange Connection According to JIS B2212
  • Working Pressure: 10K
  • Valve Testing: JIS B2003
  • Mounting Pad: ISO5211
  • Leak Proof Service
  • The fluid resistance is small, and its resistance coefficient is equal to that of a pipe section of the same length
  • Simple structure and light weight
  • Good Sealing Performance and has been Widely Used in Vacuum Systems
  • When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes.
  • Wide range of applications, with a diameter ranging from a few millimeters to a few meters, and can be applied from high vacuum to high pressure. This type of valve should generally be installed horizontally in the pipeline.
  • Excellent Sealing and Fluid Flow
  • Quarter Turn Operation
  • Body: EN GJL 250 Cast Iron (GG25 or GG40)
  • Bonnet: EN GJL 250 Cast Iron (GG25 or GG40)
  • Nut: Carbon Steel
  • Bolts: Carbon Steel
  • Ball: Stainless Steel (SS304)
  • Seat: PTFE
  • Washer: PTFE
  • Gasket: PTFE
  • Stem: Stainless Steel SS304
  • Stem Packing: PTFE
  • Gland Flange: Cast Iron GG25 or GG40
  • Gland Bolt: Carbon Steel
  • Lever: Ductile Iron (GGG40)
  • Circlip: Carbon Steel
  • Inner and outer surface of the valve is powder epoxy (250-350 Microns) coated
  • DIN Verison Available (Refer to. EKO3000)  
  • Can be used with Pneumatic Actuator
  • With Electric Actuator
  • Electric Actuator Ready