- TECHNICAL ADVANTAGES
- materıal
- Coatıng
- Versıons
Valve design according to DIN 19596
Leakage Rate as per DIN 19569-4 Class 5 (1,2 l/min Per meter)
Bi-Directional Design
Four Side Sealing
Self-Cleaning HMWPE Gate Guides for low Friction During Operation
Minimizing Thrust and Maximizing Seal Life
Self-Adjusting Double-Lip EPDM Seal Design
Wall Mounted As Standard
Stem Extensions can be discussed for special cases
Flush Bottom Design which can be made both elevated and flush bottom installation
Widely Used in Water and Wastewater Treatment Plants, Pumping Stations, Storm Tanks, Desalination plants, Irrigation, Dams and Reservoirs, etc.
Frame: AISI 304L, AISI 316L
Slide: AISI 304L, AISI 316L
Front Guides: Polyethylene (HMWPE)
Back Guides: Polyethylene (HMWPE)
Seal: EPDM
Seal Retainer: AISI 304L, AISI 316L
Bottom Seal: EPDM
Bottom Seal Retainer: AISI 304L, AISI 316L
Frame Guide: AISI 304L, AISI 316L
NRS Kit-Stem: Stainless Steel
NRS Kit-Stem Nut: Bronze
NRS Kit-Yoke: AISI 304L, AISI 316L
RS Kit-Pin: AISI 304L, AISI 316L
RS Kit-Gate Coupling Bracket: AISI 304L, AISI 316
RS Kit-End Stop: AISI 304L, AISI 316L
Remarks: Grey tones represents available options
Please Contact for Coating Options
Bi-Directional or Uni-Directional
Rising Stem and Non-Rising Stem Options Available
Manual (Handwheel and Bavel Gear)
Pneumatic (Single and double-acting)
Yoke or pedestal mounted actuators
Standard Wall Mount / Thimple Mount Available
