Wafer & Lug Type Butterfly Valve

EKO1000 & 1100

WAFER & LUG TYPE BUTTERFLY VALVE 

Pressure Ratings: PN10,16
Design Standard: BS EN593
Face to Face Length: EN 558 Series 20
Valve Test: EN12266-1
Valve Marking: EN 19
Flange Standard: EN 1092-1
Product Group: Butterfly Valve
Medium: Water



CONTACT


Sales Department:
+90 312 511 48 32
Whatsapp:
+90 533 617 47 79
Email: export@ekoval.com




  • TECHNICAL ADVANTAGES
  • materıal
  • Coatıng
  • Versıons
  • Valve Design According to BS EN593
  • Wafer Type Connection According to ISO 7005-1 EN 1092-1
  • Lug Type Connection According to EN 1092-2, ISO 7005-2
  • Face to Face Length According to EN558 Series 20
  • Valve Test According to EN12266-1
  • Pneumatic Actuators Can Fit Directly with the Top Flange
  • Top Flange ISO 5211
  • Can be Installed in Both Positions
  • Double Shaft Design 
  • Low Operating Torque Values Allows Usage of Cost-Effective Actuators
  • Low Pressure Lost
  • Easy Opening and Closing
  • Good Sealing
  • Light Weight
  • O-Rings on Both Stems for Advanced Sealing
  • Easy Gasket Replacing
  • EKO1000 Wafer Type Butterfly Valves Can be Mounted between PN10-PN16 Flanges
  • EKO1100 Lug Type Butterfly Valves Can only be mounted between PN16 Flanges
  • Body: EN GJS 500-7 (GGG50) Cast Iron, “Ductile Iron”
  • Disc: Stainless Steel 304 “316” “Aluminum Bronze”
  • Stem: Stainless Steel 420 “316”
  • Seat: EPDM “VITON” “NBR”
  • Bottom Screw Gland: SS420
  • O-Rings: EPDM 
  • Limiting Plate: St37 
  • Bolts: Galvanized Steel
  • Nuts: Galvanized Steel
  • Hand Lever: St27 Steel “Alloy Iron”
  • Inside and Outside 250 to 350 Microns Powder Epoxy Coated 
  • With Handwheel 
  • Electric Actuator Ready
  • With Electric Actuator
  • With Pneumatic Actuator
  • Single Stem Design is also Available Please ask For a Catalogue. 
    • download CATALOG

     

    • certıfıcates

    • MEDIUM